Shandong Nylon PA1212BR-3

About
Shandong Nylon PA1212BR-3 is a Polyamide material. It is available in Asia Pacific. Typical applications include: Hose/Tubing Plumbing/Piping/Potable Water&&

Product Description
Supplier	Dongchen
Generic	PA 1212
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.02 to 1.04	g/cm³
Melt Flow Rate	2.0 to 4.0	g/10min

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	> 30	kJ/m²
Charpy Unnotch Impact strength	无断裂

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	185 to 195	℃

MECHANICAL	Nominal value	Unit
Shore hardness
Shaw’s D	72
tensile strength
yield	> 40.0	MPa
Tensile strain
fracture	> 100	%
Bending modulus	1200 to 1400	MPa
bending strength	< 50.0	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.