| About |
|---|
| With the features as small absorption, non-toxic, light weight, excellent electrical insulation properties, good low temperature resistance and dimensional stability, and good forming performance, it can be widely used in aerospace, shipbuilding, automobiles, textiles, instruments, electrical, medical equipment industry, etc.&& |
| Product Description | |
|---|---|
| Supplier | Dongchen |
| Generic | PA 1010 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Antifreeze,Nontoxicity,Insulation |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 to 1.05 | g/cm³ | |
| Viscosity number | |||
| — | 90.0 to 120 | cm³/g | |
| — | 120 to 150 | cm³/g | |
| — | 160 to 200 | cm³/g | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 45.0 | MPa | |
| Tensile strain | |||
| fracture | > 250 | % | |
| bending strength | > 70.0 | MPa |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 200 to 210 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Granularity | 30.0 to 50.0 | N/g | |
| Loss on Drying | < 1.0 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I |
| 3. Type II |
| 4. Type III |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |