| About |
|---|
| Applications: EVA can be used for many applications such as greenhouse film, laminate film, agricultural film, packaging film, extrusion, injection molding and expanded foam (shoes, soles), hot melt applications etc.&& |
| Product Description | |
|---|---|
| Supplier | Potomer |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.940 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 150℃，21.6kg | 3.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 18.0 | wt% | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 65.0 | ℃ | ASTM D1525 |
| Melting temperature | 87.0 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 65 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 2 MHz | 3.10 | ASTM D150 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 90 | ASTM D2240 | |
| Shaw’s D | 37 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| MD, yield | 4.30 | MPa | ASTM D638 |
| TD, yield | 4.30 | MPa | ASTM D638 |
| MD, fracture | 11.3 | MPa | ASTM D638 |
| TD, fracture | 11.3 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| Flow rate, fracture | 800 | % | ASTM D638 |
| TD, fracture | 800 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |