Shenmamid® 1370R1

About

Product Description
Supplier	SH shenma
Generic	PA6
Material Status	Commercial: Active
Features	Glass fiber reinforced toughening

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.37	g/cm³	ISO 1183
Shrinkage rate	0.3-1.0	%	ISO 294/4

MECHANICAL	Nominal value	Unit	Test method
tensile strength	140	MPa	ISO 527-2
Tensile strain	5	%	ISO 527-2
Bending modulus	7000	MPa	ISO 178
bending strength	200	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Melting temperature	220	℃	ISO 3146
Hot deformation temperature	200	℃	ISO 75-2

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	22	kJ/m²	ISO 179/1eU
Charpy Unnotch Impact strength	100	kJ/m²	ISO 179/1eA

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.60mm	HB		UL-94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.