| About |
|---|
| Shin-Etsu FE-371 U is one of a series of high tensile, high tear fluorosilicone compounds. It is designed to process well in molding applications. It can be blended with other members of the series for intermediate hardnesses Excellent fuel and solvent resistance.&& |
| Product Description | |
|---|---|
| Supplier | Shin-Etsu |
| Generic | 氟硅氧烷 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Tensile Strength,Good tear strength,Solvent resistance,Fuel resistance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.48 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 68 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 12.3 | MPa |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure Agent | DBPH |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |