Shin-Etsu Elastomer SF-11500U

About
SF-11500U is a low durometer and low modulus fluorosilicone with excellent processing ability. Typical Applications Gaskets – Seals&&

Product Description
Supplier	Shin-Etsu
Generic	氟硅氧烷
Material Status	Commercial: Active
Features	Excellent Processability,Low Hardness
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.34	g/cm³

MECHANICAL	Nominal value	Unit	Test method
Shore hardness	15

elastic body	Nominal value	Unit
tensile strength	4.62	MPa
100% strain	0.207	MPa
Tensile strain
fracture	880	%

THERMAL	Nominal value	Unit	Test method
Post curing time
200℃	4.0	hr

Supplementary information	Nominal value	Unit	Test method
Cure Agent	DBPH

Uncured Properties	Nominal value	Unit	Test method
Curing time	0.17	hr

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.