| About |
|---|
| SV-13500U is one of a series of easy processing, general purpose silicone rubber bases. It can be used in a variety of applications requiring finishing by molding, extruding or calendaring. This product can be blended with other Shin-Etsu general purpose or no post cure bases for intermediate properties. The choice between these bases will depend on specific requirements. This product can also be extended with extending fillers. Typical Applications Roll covers. Diaphragms.&& |
| Product Description | |
|---|---|
| Supplier | Shin-Etsu |
| Generic | 硅橡胶,HTV |
| Material Status | Commercial: Active |
| Features | Excellent Processability |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 36 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 10.3 | MPa | |
| 100% strain | 0.614 | MPa | |
| Tensile strain | |||
| fracture | 890 | % | |
| tear strength | 26.3 | kN/m | |
| Compression deformation | |||
| 177℃，22 hr | 24 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Post curing time | |||
| 200℃ | 4.0 | hr |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure Agent | DBPH |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time | 0.17 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |