| About |
|---|
| Shin-Etsu X-65-130 U is a black semi-conductive silicone compound designed to give very low volume resistivity for molding and extruding. Good processability. Lower than average volume resistivity. Typical Applications EMI gaskets. Key pads.&& |
| Product Description | |
|---|---|
| Supplier | Shin-Etsu |
| Generic | 硅橡胶,HTV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Conductive |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.28 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 70 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 4.79 | MPa | |
| Tensile strain | |||
| fracture | 130 | % | |
| tear strength | 12.3 | kN/m | |
| Compression deformation | |||
| 180℃，22 hr | 20 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cure Agent | DBPH |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |