| About |
|---|
| 阻燃，增强，电动工具，电子电器，家用电器，照明工具，运动器材，汽车部件，注塑 |
| Product Description | |
|---|---|
| Supplier | Shinkong |
| Generic | polybutylene terephthalate |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Rockwell hardness | 120 | ASTM D785 | |
| Bending modulus | 9300 | Mpa | ASTM D790 |
| tensile strength | 130 | Mpa | ASTM D 638 |
| Tensile strain | 3 | % | ASTM D638 |
| bending strength | 200 | Mpa | ASTM D790 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric constant | 4 | ASTM D150 | |
| Dielectric strength | 20 | kv/mm | ASTM D149 |
| Volumetric resistance | 1.0×10^16 | Ω.cm | ASTM D 257 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame resistance | V0 | UL94 | |
| Hot deformation temperature | 210 | ℃ | ASTM D648 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃，3.2mm | 6.5 | J/m | ASTM D256 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Moisture content | 0.07 | % | ASTM D 570 |
| Shrinkage rate | |||
| MD | 0.2-0.4 | % | ASTM D955 |
| TD | 0.5-0.9 | % | ASTM D955 |
| Density | 1.61 | ASTM D792 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |