| About |
|---|
| Product Description | |
|---|---|
| Supplier | Shinkong |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.7 | g/cm³ | ASTM D792 |
| Water absorption rate | 0.07 | % | ASTM D570 |
| Shrinkage rate | |||
| MD | 0.1~0.3 | % | ASTM D955 |
| TD | 0.5~0.8 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 132 | MPa | ASTM D638 |
| Tensile strain | > 250 | % | ASTM D638 |
| bending strength | 191 | MPa | ASTM D790 |
| Bending modulus | 10100 | MPa | ASTM D790 |
| Rockwell hardness | 84 | D级 | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 Mpa | ℃ | ASTM D648 | |
| 1.8 Mpa | 205 | ℃ | ASTM D648 |
| Flame retardant level | V-0 | UL 94 | |
| Melt index | |||
| 285°C/2.16Kg | 19 | g/10min | ASTM D1238 |
| Melting temperature | |||
| DSC | 223 | ℃ | ASTM D1238 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 20 | KV/mm | ASTM D149 |
| Dielectric constant | 4 | ASTM D150 | |
| Volumetric resistance | 1E+16 | Ω-CM | ASTM D257 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 68.6 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |