Shuang-Bang AB-6060

About
One component PU Resins PU membrane is produced by coating the resin on substrate and drying it to vaporize the solvent adequately. The membrane gives soft hand-feel and dry surface, and offers waterproof and windproof properties. Using one component type PU resin alone with adequate crosslinker for yarn fixation, following by drying process to vaporize solvent adequately, could form high yarn-bonding membrane. Shoes, leather bag, ready-make clothes Blocking resistance, high water resistance, good hand-feel High solid content PU resin for dry direct coating. Bright surface, non-sticky. Contain no toxic organic tin.&&

Product Description
SupplierShuang-Bang
GenericPUR
Material StatusCommercial: Active
FeaturesNo viscosity,Crosslinked
AvailabilitysAsia Pacific

Technical Data
Supplementary informationNominal valueUnitTest method
solventDMF/TOL 

Uncured PropertiesNominal valueUnitTest method
colourClear/Transparent Colorless Clear, Light Yellow 
Solid content59 to 61%
viscosity
25℃60 to 80Pa·s

Cured PropertiesNominal valueUnitTest method
Tensile modulus
100% secant< 0.490MPa
tensile strength< 0.981MPa
Tensile strain
fracture< 100%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.