SI-LINK™ AC DFDA-5488 NT

About
DFDA-5488 NT is a fast cross-linking catalyst masterbatch designed to be used with the scorch retardant DFDB-5451NT ethylene-silane copolymer in order to produce insulation for power and control tray cables up to 1KV. Because the catalyst masterbatch is shipped separately from the silane-modified polyethylene, the components are very shelf-stable. Crosslinking of the insulation system only occurs after hot melt mixing of the two components and exposure to moisture. When DFDA-5488 NT is mixed with DFDB-5451 NT, the resulting system has excellent scorch resistance during extrusion. DFDA-5488 NT includes sufficient antioxidant so that the SI-LINK™ AC system provides excellent processing and product performance. This insulation system is designed to be effective on either copper or aluminum conductors. The recommended level of usage for DFDA-5488 NT is 5% by weight. The specific level will depend on the process and conditions used. For your particular application, contact your Dow representative for recommended levels.&&

About

DFDA-5488 NT is a fast cross-linking catalyst masterbatch designed to be used with the scorch retardant DFDB-5451NT ethylene-silane copolymer in order to produce insulation for power and control tray cables up to 1KV. Because the catalyst masterbatch is shipped separately from the silane-modified polyethylene, the components are very shelf-stable. Crosslinking of the insulation system only occurs after hot melt mixing of the two components and exposure to moisture. When DFDA-5488 NT is mixed with DFDB-5451 NT, the resulting system has excellent scorch resistance during extrusion. DFDA-5488 NT includes sufficient antioxidant so that the SI-LINK™ AC system provides excellent processing and product performance. This insulation system is designed to be effective on either copper or aluminum conductors. The recommended level of usage for DFDA-5488 NT is 5% by weight. The specific level will depend on the process and conditions used. For your particular application, contact your Dow representative for recommended levels.&&

Product Description
Supplier	DOW
Generic	PE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.930	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	1.3	g/10min	ASTM D1238
exterior	Tan to light brown pellets

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.