| About |
|---|
| PE 15803-020 is a film grade of low-density polyethylene. The grade is additive free. Typical Applications: PE 15803-020 is recommended for film extrusion, including thin films, food packaging and technical films. It complies with EU Food Contact Regulations.&& |
| Product Description | |
|---|---|
| Supplier | SIBUR |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Europe,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | GOST 11645 |
| Density | 0.919 | g/cm³ | GOST 15139 |
| ESCR(Environmental Stress Cracking Resistance) | 600 | hrs | GOST 13518 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Stress | |||
| Yield yld | 9.5 | MPa | GOST 11262 |
| Broken BRK | 11.7 | MPa | GOST 11262 |
| Elongation at Break | 600 | % | GOST 11262 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |