| About |
|---|
| PP-H120-GP/3 is a polypropylene homopolymer with standard molecular weight distribution. The product is characterized by high melt flow range, an optimal stabilization package and balanced physical and mechanical properties. TYPICAL APPLICATIONS PP-H120-GP/3 is a general purpose grade, it is recommended for Injection moulding applications and compounding. It complies with EU Food Contact Regulations.&& |
| Product Description | |
|---|---|
| Supplier | SIBUR |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | High liquidity,Homopolymer |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16 kg | 12 | g/10min | ASTM D1238 |
| Density | 0.9 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 30 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Yield yld | 10 | % | ASTM D638 |
| Elongation at Break | >200 | % | ASTM D638 |
| Flexural Modulus | 1300 | MPa | ASTM D790 |
| Rockwell hardness | 95 | R Scale | ASTM D-785 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 26 | J/m | ASTM D 256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat softening point | 155 | ℃ | ASTM D-1525 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0,20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |