SIBUR Synthetic Rubber SBS L 30-01A

About
Linear styrene-butadiene thermoplastic elastomer SBS L 30-01A is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. SBS L 30-01A is dusted with calcium stearate or amorphous silica Product description: Appearance – white to light-beige color; Morphology – crumbs or powder; Weight – 14-15 kg or 750-800 kg; Packaging – pallets and soft bag-container (big bag); Shelf life – one (1) year since the date of manufacture. Application Bitumen modification for road and roofing materials, plastic modification, in compounds for shoes, general mechanical rubber goods, in mastics and protective coatings&&

About

Linear styrene-butadiene thermoplastic elastomer SBS L 30-01A is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. SBS L 30-01A is dusted with calcium stearate or amorphous silica Product description: Appearance – white to light-beige color; Morphology – crumbs or powder; Weight – 14-15 kg or 750-800 kg; Packaging – pallets and soft bag-container (big bag); Shelf life – one (1) year since the date of manufacture. Application Bitumen modification for road and roofing materials, plastic modification, in compounds for shoes, general mechanical rubber goods, in mastics and protective coatings&&

Product Description
Supplier	SIBUR
Generic	SBS
Material Status	Commercial: Negative
Features	Block Copolymer,Inoxidizability,Linear polymer structure
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
200℃，5.0kg	< 1.0	g/10min	ASTM D1238
Combined with styrene	28.5 to 31.5	%	Internal Method
Ash Content	< 0.30	%	ASTM D5667
Volatiles	< 0.80	%	ASTM D5668
Solution viscosity
Toluene, 25 ℃	9.0 to 19	cSt	ASTM D445

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	80		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	15.0	MPa	ASTM D3182
300% strain	2.70	MPa	ASTM D3182
Tensile strain
fracture	700	%	ASTM D3182

optical performance	Nominal value	Unit	Test method
Yellowness index	< 10	YI	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.