| About |
|---|
| SKN 3345 E is essentially an acrylonitrile (31-35 %) and 1,3-butadiene copolymer obtained by emulsion polimerization method at a temperature of 32 °C with the use of phytogenous fatty acid soaps as emulsifier in accordance with the ecologically clean technology. Medium Mooney viscosity, medium content of acrylonitrile, heightened oil resistance. Application The manufacturing of cables, packing, sleeve gaskets, fuel hoses, roll coatings, technical plates, rubberized materials, belts, sealants, adhesives, shoe soles, plastic modification.&& |
| Product Description | |
|---|---|
| Supplier | SIBUR |
| Generic | NBR |
| Material Status | Commercial: Active |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Mooney viscosity | |||
| ML 1+4，100℃ | 42 to 48 | MU | Internal Method |
| Acrylonitrile content | 31.0 to 35.0 | % | Internal Method |
| Ash Content | < 0.50 | % | Internal Method |
| Volatiles | < 0.80 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 22.5 | MPa | Internal Method |
| Tensile strain | |||
| fracture | > 450 | % | Internal Method |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |