Silastic® Medical Adhesive Silicone, Type A

About
Silicone adhesive/sealant APPLICATIONS Silastic® Medical Adhesive Silicone, Type A is a one-component, low slump, translucent silicone material for bonding elastomers, synthetics, and metals for part fabrication and medical devices DESCRIPTION Silastic Medical Adhesive Silicone, Type A is a one-component, low-slump, translucent silicone used to permanently bond materials. It is solventless and cures at room temperature upon exposure to atmospheric moisture. During the curing process, the silicone adhesive releases acetic acid vapor as a by-product. After final cure, the resulting silicone elastomer possesses the appearance, texture, and general composition of many conventional silicone elastomers.&&

About

Silicone adhesive/sealant APPLICATIONS Silastic® Medical Adhesive Silicone, Type A is a one-component, low slump, translucent silicone material for bonding elastomers, synthetics, and metals for part fabrication and medical devices DESCRIPTION Silastic Medical Adhesive Silicone, Type A is a one-component, low-slump, translucent silicone used to permanently bond materials. It is solventless and cures at room temperature upon exposure to atmospheric moisture. During the curing process, the silicone adhesive releases acetic acid vapor as a by-product. After final cure, the resulting silicone elastomer possesses the appearance, texture, and general composition of many conventional silicone elastomers.&&

Product Description
Supplier	Dow Corning
Generic	硅酮
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	35		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	3.30	MPa	ASTM D412
Tensile strain
fracture	450	%	ASTM D412

Uncured Properties	Nominal value	Unit	Test method
Skin Forming Time（55% RH）	7.0 to 8.0	min

Notes
1. Typical properties: these are not to be construed as specifications.
2. 25°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.