Silopren® Electro 1700

About
The Silopren Electro 1700 and 1800 are one-component heat curable rubber materials for making elastomers (HCE) with a hardness of 70 and 77 Shore A. These silicone rubbers are based on a platinum cure system, especially developed for the manufacture of housing and weather sheds for all kinds of insulators. Key Features and Benefits One-component, ready to use Fast vulcanisation/addition curing system Outstanding ageing behaviour and weather resistance Fast hydrophobicity transfer and hydrophobicity recovery Excellent dielectric behaviour over a wide range of temperatures Very good tracking resistance- Shelf life of 3 months from date of manufacturing&&

Product Description
SupplierMomentive
Generic硅橡胶
Material StatusCommercial: Active
FeaturesWeather resistance is good,Baking,Fast Cure,Electric mark
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A70 DIN 53505

elastic bodyNominal valueUnitTest method
tensile strength5.00MPaDIN 53504
Tensile strain
fracture250%DIN 53504
tear strength16.0kN/mASTM D624

Electrical performanceNominal valueUnitTest method
Volume resistivity1.0E+15ohms·cmDIN 53482
Dielectric constant
50 Hz3.60 DIN 53483
Dissipation factor
50 Hz0.020 DIN 53483

THERMALNominal valueUnitTest method
Storage period13wk

Supplementary informationNominal valueUnitTest method
Vulcanization10.0min

Uncured PropertiesNominal valueUnitTest method
Density1.57g/cm³DIN 53479

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.