Silopren® Gel 6209

About
Silopren Gel 6209 is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. The cure rate can be accelerated significantly by heat. Key Features and Benefits Convenient 1:1 mixing by weight Low Viscosity, free of solvents Room temperature cure Mechanical shock/ vibration damping properties Very soft gel, tacky to many substrates Potential Applications Silopren Gel 6209 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and potting of cable joints. Silopren Gel 6209 can also be used for other applications that require a clear, tacky gel with good dampening properties.&&

About

Silopren Gel 6209 is a kit matched easily pourable, solvent free, clear and colourless two-component silicone gel. After mixing the A and the B component at a mix ratio of 1:1 the material cures at room temperature by an addition reaction to a tacky silicone gel with excellent vibration dampening properties. The cure rate can be accelerated significantly by heat. Key Features and Benefits Convenient 1:1 mixing by weight Low Viscosity, free of solvents Room temperature cure Mechanical shock/ vibration damping properties Very soft gel, tacky to many substrates Potential Applications Silopren Gel 6209 is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and potting of cable joints. Silopren Gel 6209 can also be used for other applications that require a clear, tacky gel with good dampening properties.&&

Product Description
Supplier	Momentive
Generic	硅凝胶
Material Status	Commercial: Active
Features	Low Viscosity,noise reduction,Soft
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.980	g/cm³

Electrical performance	Nominal value	Unit
Volume resistivity	1.0E+15	ohms·cm
Dielectric strength	20	kV/mm
Dielectric constant
60 Hz	2.80
Dissipation factor
60 Hz	1.0E-3

Supplementary information	Nominal value	Unit	Test method
Volumetric Expansion	0.00100	1/℃

Uncured Properties	Nominal value	Unit
colour
—	Clear/Transparent
viscosity
23℃，Bohlin，Casson Model	0.60	Pa·s
23℃，Bohlin，Casson Model	0.90	Pa·s
storage stability
23℃	60	min

THERMAL	Nominal value	Unit
Thermal conductivity coefficient	0.17	W/m/K
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.0
Storage period
< 27℃	> 17	wk

Notes
1. Typical properties: these are not to be construed as specifications.
2. Part B
3. Part A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.