Silopren® LSR 2080

About
Silopren LSR 2080 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications. Key Features and Benefits Vulcanizates consisting of Silopren LSR 2080 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential Applications Because of its outstanding properties, Silopren LSR 2080 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Vibration dampers Catheters Parts of medical technical equipment … and many more.&&

About

Silopren LSR 2080 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications. Key Features and Benefits Vulcanizates consisting of Silopren LSR 2080 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential Applications Because of its outstanding properties, Silopren LSR 2080 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Vibration dampers Catheters Parts of medical technical equipment … and many more.&&

Product Description
Supplier	Momentive
Generic	硅橡胶,LSR
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Steam sterilized,noise reduction,Biocompatible,Low temperature toughness,Radiation disinfection,Good stability,Ozone resistance,Heat Stabilized,Ethylene oxide disinfection,Good coloring
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³	DIN 53479

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	79		DIN 53505

elastic body	Nominal value	Unit	Test method
tensile strength	7.00	MPa	DIN 53504
Tensile strain
fracture	150	%	DIN 53504
tear strength	5.00	kN/m	ASTM D624
Compression deformation
175℃，22 hr	25	%	ISO 815

THERMAL	Nominal value	Unit
Thermosetting components
Component A	按重量计算的混合比: 1.0
Component B	按重量计算的混合比: 1.0
Post curing time
200℃	4.0	hr

Supplementary information	Nominal value	Unit	Test method
Vulcanization（175℃）	10.0	min

Uncured Properties	Nominal value	Unit	Test method
colour
—	Translucent
—	Translucent
viscosity			DIN 53019
20℃	250	Pa·s	DIN 53019
20℃	250	Pa·s	DIN 53019
storage stability
20 ℃	4300	min

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die B
3. Part B
4. Part A
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.