| About |
|---|
| Silopren LSR 2345/06 TP 3585 is a electrically conductive two-component liquid silicone rubber for injection moulding processes. Key Features and Benefits Vulcanisates consisting of Silopren LSR 2345/06 TP 3585 are distinguished by the following properties: electrically conductive excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties outstanding resistance to ageing not readily combustible, does not melt or drip Potential Applications Because of the outstanding properties Silopren LSR 2345/06 TP 3585 is particularly suitable for the following elastomeric articles: electrodes, field control elements, cable terminals, cable connectors, high voltage plugs, sealing elements s.o.&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,LSR |
| Material Status | Commercial: Active |
| Features | Conductive,Low temperature toughness,Good stability,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.08 | g/cm³ | DIN 53479 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 40 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 7.00 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 650 | % | DIN 53504 |
| tear strength | 40.0 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 45 | ohms·cm | DIN 53482 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 | ||
| Storage period | |||
| 2 to 10 ℃ | 51 | wk | |
| Post curing time | |||
| 200℃ | 4.0 | hr |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（175℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Black | ||
| — | Black | ||
| viscosity | DIN 53018 | ||
| 20℃ | 550 | Pa·s | DIN 53018 |
| 20℃ | 550 | Pa·s | DIN 53018 |
| storage stability | |||
| 20 ℃ | 4300 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 3. Part B |
| 4. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |