| About |
|---|
| Silopren LSR 2530 is a two-component liquid silicone rubber especially developed for the coating of textiles and glassfibre fabrics. Key Features and Benefits Vulcanisates consisting of Silopren LSR 2530 are distinguished by the following properties: low viscosity excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties long service life at dynamic stress high stability to ozone and ultraviolet light outstanding resistance to ageing excellent dielectric behaviour over a wide range of temperatures not readily combustible, does not melt or drip easy pigmentable with the LSR Colour Pastes Potential Applications Because of the outstanding properties Silopren LSR 2530 is particularly suitable for the following applications: textile coating for protective suits or conveyor belts, coating of glasfibre fabric sleeves, coating of fabrics for compensators, tents and other technical applications s.o.&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,LSR |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low Viscosity,Low temperature toughness,Good stability,Ozone resistance,Heat Stabilized,Good coloring,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | DIN 53479 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 30 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 4.00 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 500 | % | DIN 53504 |
| tear strength | 10.0 | kN/m | ASTM D624 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（175℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Translucent | ||
| — | Translucent | ||
| viscosity | DIN 53018 | ||
| 20℃ | 60 | Pa·s | DIN 53018 |
| 20℃ | 60 | Pa·s | DIN 53018 |
| storage stability | |||
| 20 ℃ | 4300 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 3. Part B |
| 4. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |