| About |
|---|
| Silopren LSR 4600 FC liquid silicone rubber is a family of platinum catalyzed fast cure two-component liquid silicone rubber offered in a variety of different durometers. With faster cure at lower temperatures such as 100°C, it is an excellent candidate to consider for injection molding onto lower temperature substrates such as polycarbonate. Key Features and Benefits fast cure at low temperatures long pot life UV resistance ISO 10993/USP Class VI tested(a) low viscosity chemical resistance high tear strength Potential Applications respiratory/anesthesia masks wound drain bulbs surgical devices diagnostics imaging fluid and drug delivery thermoplastic overmolding&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,LSR |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low Viscosity,Good tear strength,Solvent resistance,Fast Cure |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | DIN 53479 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 36 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 8.00 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 700 | % | DIN 53504 |
| tear strength | 30.0 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 1.0 | ||
| Component B | 按重量计算的混合比: 1.0 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（175℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Translucent | ||
| — | Translucent | ||
| viscosity | DIN 53018 | ||
| 20℃ | 250 | Pa·s | DIN 53018 |
| 20℃ | 250 | Pa·s | DIN 53018 |
| storage stability | |||
| 20 ℃ | 2900 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 3. Part B |
| 4. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |