| About |
|---|
| Silplus 40 MP is a heat cured elastomer with outstanding processing capability. Silplus 40 MP heat cured elastomer when properly compounded and catalyzed may be considered for use in a wide variety of applications such as extrusion, molding and calendaring. Key Features and Benefits compounding simplicity good extrudability high mechanical properties good green strength easily blendable versatile Potential Applications Because of its outstanding properties, Silplus 40 MP heat cured elastomer is an excellent candidate to consider for use in most types of molding, extrusion and calendaring applications.&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,HTV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Green Strength,Baking |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Mooney viscosity | |||
| 25℃ | 25 | MU | DIN 53523 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 40 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 9.00 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 750 | % | DIN 53504 |
| tear strength | 17.0 | kN/m | ASTM D624 |
| Compression deformation | |||
| 175℃，22 hr | 18 | % | ISO 815 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（170℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.12 | g/cm³ | DIN 53479 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |