| About |
|---|
| Silplus 70 CW is a heat cured silicone rubber base compound that is an excellent candidate to consider for use in the cable and wire industry. Key Features and Benefits excellent processing (high green strength) good mechanical profile very good electrical properties enhanced high temperature resistance Potential Applications Because of its outstanding properties, Silplus 70 CW heat cured silicone is an excellent candidate to consider for use in most types of cable and wire applications.&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅橡胶,HTV |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Electrical Properties,Good Green Strength,Baking,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Mooney viscosity | |||
| 25℃ | 57 | MU | DIN 53523 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 72 | DIN 53505 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 11.0 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 380 | % | DIN 53504 |
| tear strength | 24.0 | kN/m | ASTM D624 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric strength | 25 | kV/mm | IEC 60243-1 |
| Dielectric constant | |||
| 50 Hz | 3.10 | IEC 60250 | |
| Dissipation factor | |||
| 1 kHz | 2.6E-4 | IEC 60250 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Vulcanization（120℃） | 10.0 | min |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.20 | g/cm³ | DIN 51757 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die B |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |