| About |
|---|
| SilTRUST TSE3661 is a two-component condensation cure silicone rubber designed for electric potting. SilTRUST TSE3661 cures at room temperature to form an elastic rubber and adheres to various types of materials such as metal, plastics, glass and ceramics without the use of primers. Key Features and Benefits Low viscosity allows for excellent flowability Fast Cure Excellent deep section cure Excellent adhesive properties : primerless adhesion to many types of substrates No cure inhibition Flame retardant: UL94HB recognized (File No: E56745) Potential Applications Potting of electric and communications parts Moisture proof sealing of meters Moisture proof coating of electric circuit boards&& |
| Product Description | |
|---|---|
| Supplier | Momentive |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Features | High liquidity,Low Viscosity,Flame Characteristics,Good bond,Fast Cure,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 30 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 1.10 | MPa | |
| Tensile strain | |||
| fracture | 120 | % |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1.0E+17 | ohms·cm | |
| Dielectric strength | 20 | kV/mm | |
| Dielectric constant | |||
| 60 Hz | 3.20 | ||
| Dissipation factor | |||
| 60 Hz | 0.020 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Blue-Green | ||
| — | White | ||
| Density | |||
| — | 1.04 | g/cm³ | |
| — | 1.20 | g/cm³ | |
| viscosity | |||
| — | 0.010 | Pa·s | |
| — | 3.5 | Pa·s | |
| — | 4.0 | Pa·s | |
| Curing time | |||
| 23℃ | 72 | hr | |
| Tack Free Time | 20 | min | |
| storage stability | 6.0 | min |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.27 | W/m/K | Internal Method |
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 3.0 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Part B |
| 3. Part A |
| 4. Mixed |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |