| About |
|---|
| Sinelec CCB6825 is a Specialty Polystyrene material. It is available in Asia Pacific for sheet extrusion. Primary attribute of Sinelec CCB6825: Conductive. Typical application of Sinelec CCB6825: Sheet&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PS (special type) |
| Material Status | Commercial: Active |
| Features | Elastic,Good wear resistance,Grease resistance,Fuel resistance |
| Availabilitys | North America,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 to 1.15 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，10.0kg | 1.0 to 4.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 15.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 25 | % | ASTM D638 |
| Bending modulus | 1000 | MPa | ASTM D790 |
| bending strength | 20.0 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 110 | J/m | ASTM D256 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | < 1.0E+5 | ohms | ASTM D257 |
| Volume resistivity | < 1.0E+5 | ohms·cm | ASTM D257 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |