| About |
|---|
| DH-F22M is a kind of pellet PVDF; has high melting viscosity and suitable for making various PVDF products through compression molding. Products made from DH-F22M have a wide range of service temperature (-50°C to 150°C).&& |
| Product Description | |
|---|---|
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | High Viscosity |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.75 to 1.79 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，5.0kg | 1.0 to 5.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| balance | < 0.050 | % | ASTM D570 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 165 to 171 | ℃ | ASTM D3418 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 76 to 80 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| Yield, 23 ℃ | > 35.0 | MPa | ASTM D638 |
| 23℃ | > 30.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 25 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 3. 2.0 in/min |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |