| About |
|---|
| SINPOLENE MBB3131 is LLDPE-based black masterbatch designed specifically for use in tubular film blowing, blow moulding and extrusion of polyolefin. SINPOLENE MBB3131 has high pigment loading and thus offers high coloring value with superior quality and performance. SINPOLENE MBB3131 is delivered as free flowing pellets for processing convenience. The product should be stored in dry place. CHARACTERISTICS * Easy processing * Good dispersion * High jetness * Minimal wear effect on processing equipment&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PE |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.14 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，10.0kg | < 15 | g/10min | ASTM D1238 |
| Carbon black content | 40 | % | ASTM D1603 |
| water content | < 0.20 | % | ASTM D3030 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |