| About |
|---|
| Sinvicomp SMG3500 is a Flexible Polyvinyl Chloride material. It is available in Asia Pacific for injection molding. Important attributes of Sinvicomp SMG3500 are: Food Contact Acceptable Non-Toxic Typical application of Sinvicomp SMG3500: Consumer Goods&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Nontoxicity |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| thermal stability | |||
| 190℃ | > 30 | min | ASTM D2115-92 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 89 | ASTM D2240 | |
| tensile strength | |||
| yield | 18.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 280 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |