SINVICOMP SRF3705E

About
Sinvicomp SRF3705E is a Rigid Polyvinyl Chloride material. It is available in Asia Pacific for injection molding. Primary attribute of Sinvicomp SRF3705E: Impact Resistant. Typical applications include: Electrical/Electronic Applications Engineering/Industrial Parts&&

Product Description
Supplier	Teknor Apex
Generic	PVC，刚硬
Material Status	Commercial: Active
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.38 to 1.42	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	50.0	MPa	ASTM D638
Tensile strain
fracture	110	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	29	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	88.0	℃	ASTM D1525
thermal stability
Congo Red，190℃	1.7	hr	BS 2782

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.