| About |
|---|
| Sinvicomp SRF3872 is a Rigid Polyvinyl Chloride material. It is available in Asia Pacific for injection molding. Primary attribute of Sinvicomp SRF3872: Impact Resistant. Typical applications include: Electrical/Electronic Applications Engineering/Industrial Parts&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PVC，刚硬 |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.38 to 1.42 | g/cm³ | ASTM D792 |
| Congo Red（190℃） | 30.0 | min | BS 2782 |
| Melt Flow | |||
| 190℃/21.6kgs | 28g/10mins | ASTM D1238 | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 69 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 86.0 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 76 | ASTM D2240 | |
| tensile strength | |||
| yield | 50.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 30 | % | ASTM D638 |
| Bending modulus | 2700 | MPa | ASTM D790 |
| bending strength | 73.0 | MPa | ASTM D790 |
| Elastic modulus | |||
| in Tension | 2.50 | GPa | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |