Sipchem EVA 2518

About
Sipchem EVA 2518 is an 18.2% ethylene – vinyl acetate copolymer resin, designed for a variety of foam moulding application; manufactured by IPC† in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 2518 exhibits low melting temperature, excellent processability and mechanical properties. Applications: Foams, Shoe Soles, Injection Moulding, Profile Extrusion and Compounds.&&

About

Sipchem EVA 2518 is an 18.2% ethylene – vinyl acetate copolymer resin, designed for a variety of foam moulding application; manufactured by IPC† in The Kingdom of Saudi Arabia using an Exxon-Mobil high-pressure tubular process. EVA 2518 exhibits low melting temperature, excellent processability and mechanical properties. Applications: Foams, Shoe Soles, Injection Moulding, Profile Extrusion and Compounds.&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	Excellent Processability,Copolymer
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	Internal Method
Melt Flow Rate
190℃，2.16kg	2.5	g/10min	ASTM D1238
Vinyl acetate content	18.2	wt%	Internal Method

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	64.0	℃	ASTM D1525
Melting temperature	87.0	℃	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	90
Shaw’s D	38
tensile strength
yield	5.20	MPa
fracture	14.7	MPa
Tensile strain
yield	260	%
fracture	> 800	%
Bending modulus	60.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.