| About |
|---|
| SKYPET® BL is a Polyethylene Terephthalate (PET) material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of SKYPET® BL are: Flame Rated Chemical Resistant Clarity Good Processability Heat Resistant Typical applications include: Containers Bottles Packaging Sheet&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Solvent resistance,Heat Stabilized |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| yield | 57.0 | MPa | ASTM D638 |
| yield | 56.9 | MPa | ISO 527-2/50 |
| fracture | 25.0 | MPa | ASTM D638 |
| fracture | 23.4 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 4.0 | % | ASTM D638 |
| yield | 4.0 | % | ISO 527-2/50 |
| fracture | 110 | % | ASTM D638 |
| fracture | 110 | % | ISO 527-2/50 |
| Bending modulus | |||
| 1.27 mm | 1110 | MPa | ISO 178 |
| bending strength | |||
| 1.27 mm | 59.3 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| -40℃ | 21 | J/m | ASTM D638 |
| 23℃ | 38 | J/m | ASTM D638 |
| -40℃ | 20 | kJ/m² | ISO 180 |
| 23℃ | 36 | kJ/m² | ISO 180 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 69.0 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 67.5 | ℃ | ISO 75-2/B |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 3.00 mm | HB | UL 94 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 88.0 | % | ASTM D1003 |
| Haze | < 1.0 | % | ASTM D1003 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | |||
| — | 1.34 | g/cm³ | ASTM D792 |
| — | 1.33 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.30 to 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | < 0.30 | % | ASTM D570 |
| Apparent viscosity of melt | |||
| 275℃，10000 sec^-1 | 67000 | mPa·s | ASTM D3236 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |