| About |
|---|
| Eco-friendly and human-friendly bio-based materials SKYPLETE E-series are made of differentiated bio-based products to deliver much enhanced performance comparable to petro-based materials. ES200 Bio-based copolyester Heat resistance (HDT: 80-107°C) FDA compliance for food contact Clarity and gloss Impace resistance Chemical resistance Low odor Nozzle temp: 250 – 280°C Bed temp: 70 – 80°C&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | 生物基共聚聚酯 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,High impact resistance,Renewable resources,Food contact compliance,Low odor,Heat Resistance, Good,Solvent resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.20 to 0.50 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 85.0 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 89.0 | % | ASTM D1003 |
| Haze | < 1.0 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 115 | ASTM D785 | |
| tensile strength | |||
| yield | 51.0 | MPa | |
| fracture | 42.0 | MPa | |
| Tensile strain | |||
| yield | 5.7 | % | |
| fracture | 150 | % | |
| Bending modulus | 2130 | MPa | ASTM D790 |
| bending strength | 86.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.050 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |