| About |
|---|
| Durable & human-friendly copolyester SKYPLETE G-series are copolyesters, not containing hazardous components such as styrene of BPA found in ABS or PC. G-series deliver outstanding durability and aesthetic surface. GE100 Clarity and gloss Low shrinkage/warping Low odor Nozzle temp: 230 – 250°C Bed temp: 60 – 70°C&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PCTG |
| Material Status | Commercial: Active |
| Features | Low warping,Good Clarity,Good surface appearance,Low contractility,Food contact compliance,Low odor,Durability |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| balance | 0.13 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 110 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ASTM D648 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Refractive index | 1.570 | ASTM D542 | |
| Transmittance | 90.0 | % | ASTM D1003 |
| Haze | < 1.0 | % | ASTM D1003 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 108 | ASTM D785 | |
| tensile strength | |||
| yield | 50.0 | MPa | |
| fracture | 29.4 | MPa | |
| Tensile strain | |||
| yield | 4.5 | % | |
| fracture | 180 | % | |
| Bending modulus | 2100 | MPa | ASTM D790 |
| bending strength | 68.6 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2.0 in/min |
| 3. 0.050 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |