| About |
|---|
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PCT |
| Material Status | Commercial: Negative |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | ASTM D792 | |
| viscosity | 0.742 | dL/g | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 52.7 | MPa | ASTM D638 |
| fracture | 41.9 | MPa | ASTM D638 |
| Tensile modulus | 1490 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 6.5 | % | ASTM D638 |
| bending strength | 70.7 | MPa | ASTM D790 |
| Bending modulus | 1660 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 69 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | 287 | ℃ | ASTM D1525 |
| Glass transition temperature | 90 | ℃ | ASTM D1525 |
| Hot deformation temperature | |||
| 0.46 MPa | 87 | ℃ | ASTM D648 |
| 1.82 MPa | 75 | ℃ | ASTM D648 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.80E+17 | ohm | ASTM D257 |
| Volume resistivity | 1.37E+17 | ohm·cm | ASTM D257 |
| Dielectric strength | 27.9 | kV/mm | ASTM D149 |
| Dielectric constant | 4.01 | ASTM D150 | |
| Dissipation factor | 5.1E-3 | ASTM D150 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |