| About |
|---|
| Skyrol ® SH64 is an optically clear film that has been pretreated on both sides. One side is pretreated for excellent performance in most print processes, and the other side is treated with an antistatic coating for write-on, wipe-off applications. SH64 has excellent processability in converting and sheeting operations.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Optical performance,Good Printability,Antistatic property |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Shrinkage rate | Internal Method | ||
| MD：150℃，0.057 mm，30 min | 1.6 | % | Internal Method |
| MD：150℃，0.066 mm，30 min | 1.5 | % | Internal Method |
| TD：150℃，0.057 mm，30 min | 0.70 | % | Internal Method |
| TD：150℃，0.066 mm，30 min | 0.60 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.30 | ASTM D1894 | |
| With oneself – dynamic | 0.30 | ASTM D1894 | |
| With oneself – static | 0.30 | ASTM D1894 | |
| With oneself – static | 0.40 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield, 57 µ m | 221 | MPa | ASTM D882 |
| MD, yield, 66 µ m | 221 | MPa | ASTM D882 |
| TD, yield, 57 µ m | 241 | MPa | ASTM D882 |
| TD, yield, 66 µ m | 221 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 57 µ m | 140 | % | ASTM D882 |
| MD, fracture, 66 µ m | 140 | % | ASTM D882 |
| TD, fracture, 57 µ m | 120 | % | ASTM D882 |
| TD, fracture, 66 µ m | 120 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D523 | ||
| 57.0 µm | 181 | ASTM D523 | |
| 66.0 µm | 181 | ASTM D523 | |
| Transmittance | ASTM D1003 | ||
| 57.0 µm | 90.0 | % | ASTM D1003 |
| 66.0 µm | 89.0 | % | ASTM D1003 |
| Haze | ASTM D1003 | ||
| 57 µm | 1.7 | % | ASTM D1003 |
| 66 µm | 1.9 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 57 µm |
| 3. 66 µm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |