| About |
|---|
| Skyrol® SH94 is optically very clear and glossy. Both sides are pretreated with anti-static coating.SH94 is specially designed to improve ink / coating adhesion properties. With these advantages, SH94 is widely used as substrate for montage, overhead projection transparencies, color proofing, etc.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Optical performance,Good bond,Antistatic property |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Shrinkage rate | Internal Method | ||
| MD：150℃，0.05 mm，30 min | 1.3 | % | Internal Method |
| TD：150℃，0.05 mm，30 min | 0.60 | % | Internal Method |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield, 50 µ m | 228 | MPa | ASTM D882 |
| TD, yield, 50 µ m | 234 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m | 150 | % | ASTM D882 |
| TD, fracture, 50 µ m | 120 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 50 µm | 169 | ASTM D523 | |
| Transmittance | |||
| 50.0 µm | 90.0 | % | ASTM D1003 |
| Haze | |||
| 50 µm | 1.4 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50 µm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |