| About |
|---|
| Skyrol® SP29N is a heat-shrinkable polyester film with excellent shrinking characteristics. With an anti-static treatment on one side, SP29N is used in various shrinkable packaging applications, such as outer wrapping/labeling for PET and glass bottles, cans and other kinds of containers. SP29N is currently available in 160 and 200 gauges with other gauges available on special request.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Antistatic property,Good thermal contraction |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D1505 |
| Shrinkage rate | |||
| MD：100℃，0.05 mm | 2.2 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.30 | ASTM D1894 | |
| With oneself – static | 0.40 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield, 50 µ m | 62.1 | MPa | ASTM D882 |
| TD, yield, 50 µ m | 241 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m | 570 | % | ASTM D882 |
| TD, fracture, 50 µ m | 87 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 50 µm | 149 | ASTM D523 | |
| Haze | |||
| 50 µm | 3.9 | % | ASTM D1003 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |