Softell TKG 2039N C12897

About
Softell TKG 2039N C12897 is a 25% glass fiber reinforced PP copolymer, with high UV resistance, very good soft touch haptics, high flowability, high dimensional stability and very high scratch resistance. The product is available in different color matched, pellet form. Due to pigmentation, ash content may vary between 25 -30 %. Material shows low shrinkage and has a very low warpage tendency. This grade is delivered in C12897 color version. For regulatory compliance information, see Softell TKG 2039N C12897 Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).&&

About

Softell TKG 2039N C12897 is a 25% glass fiber reinforced PP copolymer, with high UV resistance, very good soft touch haptics, high flowability, high dimensional stability and very high scratch resistance. The product is available in different color matched, pellet form. Due to pigmentation, ash content may vary between 25 -30 %. Material shows low shrinkage and has a very low warpage tendency. This grade is delivered in C12897 color version. For regulatory compliance information, see Softell TKG 2039N C12897 Product Stewardship Bulletin (PSB) and Safety Data Sheet (SDS).&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Weather resistance is good,Low warping,Good Dimensional Stability,High liquidity,Low contractility,Copolymer,Soft,High scratch resistance
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.09	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	11	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	15	kJ/m²	ISO 179/1eA
23℃	45	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	135	℃	ISO 75-2/A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	52		ISO 868
Tensile strain
fracture	21	%	ISO 527-2
Bending modulus
23℃	2500	MPa	ISO 178-A

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.039 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.