Softell TKG 442N C12897

About
Softell TKG 442N C12897 is a 13% glass fiber reinforced PP copolymer, with excellent dimensional stability, good surface appearance, low gloss and excellent scratch resistance. Product is available as a customized color matched, pellet form. Due to pigmentation ash content may vary between 13-17%. This very low warpage grade has been especially designed for aesthetical automotive interior applications. Softell TKG 442N combines softtouch haptics, a matt surface and very good sound dampening. This grade is delivered in C12897 color version. This grade is not intended for medical, pharmaceutical, food and drinking water applications.&&

About

Softell TKG 442N C12897 is a 13% glass fiber reinforced PP copolymer, with excellent dimensional stability, good surface appearance, low gloss and excellent scratch resistance. Product is available as a customized color matched, pellet form. Due to pigmentation ash content may vary between 13-17%. This very low warpage grade has been especially designed for aesthetical automotive interior applications. Softell TKG 442N combines softtouch haptics, a matt surface and very good sound dampening. This grade is delivered in C12897 color version. This grade is not intended for medical, pharmaceutical, food and drinking water applications.&&

Product Description
Supplier	LyondellBasell
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good surface appearance,Good Dimensional Stability,Low contractility,Copolymer,Soft,High scratch resistance,Low Gloss
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.00	g/cm³	ISO 1183/A
Melt Flow Rate
230℃，2.16kg	12	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile strain
fracture	12	%	ISO 527-2
Bending modulus
23℃	2100	MPa	ISO 178-A

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	6.0	kJ/m²	ISO 179/1eA
23℃	21	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	131	℃	ISO 75-2/B
Vicat Softening Temp	110	℃	ISO 306/A

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.039 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.