| About |
|---|
| Solanyl® C2003 is an end compound suitable for extrusion. Solanyl® C2003 can be processed on conventional extrusion lines. Solanyl® C2003 is a competitive alternative for currently used biodegradable plastics, like PP & PS for a wide range of applications. Solanyl® C2003 can be mixed with most biopolyesters or starch based plastics to reduce costs. Solanyl® C2003 has a natural feel and look. Solanyl® C2003 is biodegradable and has a biobased or plant based content of >60% (at a small premium ~70% can be delivered as well). Applications in which Solanyl ® C2003 can be used are: Consumer goods & Packaging Agriculture products Thermoform applications Cups, boxes & trays Plates and sheets Groundwork applications like pipes Extruded profiles&& |
| Product Description | |
|---|---|
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Renewable resources,Biodegradable,Food contact compliance,Compostable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.25 to 1.30 | g/cm³ | ISO 1183 |
| Apparent density | 0.70 to 0.80 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 170℃，2.16kg | 2.0 to 4.0 | g/10min | |
| Spiral flow length | 22.0 to 40.0 | cm | |
| Shrinkage rate | < 2.0 | % | ISO 294-4 |
| water content | < 0.60 | Internal Method | |
| Ash Content | < 2.0 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| injection molding | > 2000 | MPa | |
| Cutting, injection molding | > 1300 | MPa | |
| Tensile strain | |||
| Yield, injection molding | 4.0 to 7.0 | % | |
| Fracture, injection molding | > 30 | % | |
| Bending modulus | |||
| injection molding | > 1800 | MPa | ISO 178 |
| bending strength | |||
| injection molding | > 30.0 | MPa | ISO 178 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 300 to 500 | µm | |
| Tensile modulus | |||
| MD | 2.00 to 2.20 | MPa | |
| TD | > 1.80 | MPa | |
| tensile strength | |||
| injection molding | > 30.0 | MPa | ISO 527-2 |
| MD, yield | 32.0 to 34.0 | MPa | |
| TD, yield | 18.0 to 20.0 | MPa | |
| MD | 34.0 to 39.0 | MPa | |
| TD | 18.0 to 22.0 | MPa | |
| Tensile strain | |||
| MD, yield | 6.0 to 7.0 | % | |
| TD, yield | 4.0 to 5.0 | % | |
| MD, fracture | 60 to 130 | % | |
| TD, fracture | 40 to 80 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| injection molding | > 3.4 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| injection molding | > 40 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 55.0 to 60.0 | ℃ | ISO 75-2/A |
| Glass transition temperature | 59.0 to 63.0 | ℃ | DSC |
| Vicat Softening Temp | 55.0 to 60.0 | ℃ | ISO 306/A |
| Melting temperature | |||
| DSC | 155 to 158 | ℃ | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Water Activity | < 0.300 | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Mold Temperature: 77°F, Melt Temperature: 338 to 374°F |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |