| About |
|---|
| Solanyl® C8101 is an end compound suitable for film applications and is specially developed for packaging. Solanyl® C8101 can be processed on conventional blown or cast film extrusion lines suitable for (multi-layer) flexible films. Solanyl® C8101 is a competitive alternative for currently used biodegradable plastics and LDPE for a wide range of applications. Solanyl® C8101 has a natural feel and look. Solanyl® C8101 is biodegradable and has a biobased or plant derived material content of > 40%. Applications in which Solanyl ® C8101 can be used are: Packaging & Consumer goods Agriculture products&& |
| Product Description | |
|---|---|
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Renewable resources,Biodegradable,Food contact compliance,Compostable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| film thickness | |||
| test | 40 to 200 | µm | |
| tensile strength | |||
| injection molding | 13.0 to 15.0 | MPa | ISO 527-2 |
| MD, yield | 13.0 to 15.0 | MPa | |
| TD, yield | 9.00 to 12.0 | MPa | |
| MD | 15.0 to 20.0 | MPa | |
| TD | 12.0 to 15.0 | MPa | |
| Elmandorf tear strength | |||
| MD | 10 to 30 | N | ISO 6383-2 |
| MD | 58 | N | |
| TD | 10 to 40 | N | ISO 6383-2 |
| TD | 40 | N | |
| Water vapor transmittance | |||
| 23℃，75% RH | 70 to 100 | g/m²/24 hr | |
| 23℃，85% RH | 130 to 230 | g/m²/24 hr | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| injection molding | 12 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| injection molding | 20 to 100 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | |||
| Injection molding | 30 to 35 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| Injection molding | 60 to 70 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 50.0 | ℃ | ISO 75-2/B |
| Glass transition temperature | 45.0 to 50.0 | ℃ | DSC |
| Vicat Softening Temp | 49.0 | ℃ | ISO 306/A |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Water Activity | 0.150 to 0.250 | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 47 | ISO 868 | |
| Tensile modulus | |||
| injection molding | 300 to 500 | MPa | |
| Cutting, injection molding | 200 to 400 | MPa | |
| Tensile strain | |||
| Yield, injection molding | 20 to 30 | % | |
| Fracture, injection molding | > 200 | % | |
| Bending modulus | |||
| injection molding | 500 to 600 | MPa | ISO 178 |
| bending strength | |||
| injection molding | 15.0 to 20.0 | MPa | ISO 178 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.25 to 1.30 | g/cm³ | ISO 1183 |
| Apparent density | 0.70 to 0.80 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 170℃，5.0kg | 2.0 to 6.0 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 190℃，2.16 kg | 9.00 to 11.0 | cm³/10min | ISO 1133 |
| Spiral flow length | > 40.0 | cm | |
| Shrinkage rate | < 4.0 | % | ISO 294-4 |
| water content | < 1.1 | Internal Method | |
| Ash Content | 1.0 to 2.0 | % | Internal Method |
| Apparent viscosity of melt | |||
| 140℃，10.0 sec^-1 | 4330 | Pa·s | |
| 140℃，100 sec^-1 | 1710 | Pa·s | |
| 140℃，1000 sec^-1 | 506 | Pa·s | |
| 170℃，10.0 sec^-1 | 4680 | Pa·s | |
| 170℃，100 sec^-1 | 1360 | Pa·s | |
| 170℃，1000 sec^-1 | 292 | Pa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Mold Temperature: 77°F |
| 3. DIN 53514 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |