About |
---|
Solanyl® C8104 is an end compound suitable for film applications and is specially developed for packaging. Solanyl® C8104 can be processed on cast film extrusion lines suitable for (multi-layer) flexible films. Applications in which Solanyl® C8104 can be used are: (Fast food) Packaging & Consumer goods Carrier & refuse bags Short life biodegradable products for single use disposables Agriculture products&& |
Product Description | |
---|---|
Generic | 生物可降解聚合物 |
Material Status | Commercial: Active |
Features | Good flexibility,Renewable resources,Biodegradable |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.40 | g/cm³ | ISO 1183 |
Apparent density | 0.83 | g/cm³ | ISO 60 |
Melt Flow Rate | |||
190℃,2.16kg | 2.0 to 5.0 | g/10min | ISO 1133 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Tensile modulus | 390 | MPa | ISO 527-2 |
tensile strength | 17.0 | MPa | ISO 527-2 |
Bending modulus | 370 | MPa | ISO 178 |
bending strength | |||
3.50% strain | 9.00 | MPa | ISO 178 |
film | Nominal value | Unit | Test method |
---|---|---|---|
Nitrogen transfer rate | |||
45 µm | 160 | cm³/m²/24 hr | DIN 53380-2 |
Oxygen transfer rate | |||
45 µm | 850 | cm³/m²/24 hr | ISO 15106-3 |
Water vapor transmittance | |||
45 µm | 70 | g/m²/24 hr | ISO 15106-3 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Melting temperature | |||
DSC | > 155 | ℃ | ISO 3146 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |