About |
---|
Product Description | |
---|---|
Supplier | Solvay |
Material Status | Commercial: Active |
Features | Low Viscosity,Homopolymer |
Availabilitys | Asia Pacific,North America,Latin America,Europe,Africa & Middle East |
Process Methods | Extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Specific Gravity | 1.75-1.80 | ASTM D792 | |
Melt Flow Rate | |||
230℃,5.0kg | 4.0-8.0 | g/10min | ASTM D1238 |
Water Absorption | |||
23℃,24hr | <0.04 | % | ASTM D570 |
Mold Shrinkage | 2.0-3.0 | % |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Tensile Modulus | |||
23℃,2.00 mm | 1700-2500 | MPa | ASTM D638 |
Tensile Strength | |||
Yield yld, 23 ° C, 2.00 mm | 50-60 | MPa | ASTM D638 |
Broken BRK, 23 ° C, 2.00 mm | 30-50 | MPa | ASTM D638 |
Tensile Elongation | |||
Yield yld, 23 ° C, 2.00 mm | 5-10 | % | ASTM D638 |
Broken BRK, 23 ° C, 2.00 mm | 20-300 | % | ASTM D638 |
Taber Abrasion | |||
1000 cycles, 1000 g, CS-10 wheels | 5-10 | mg | ASTM D4060 |
Frictional coefficient | |||
Dynamic | 0.15-0.35 | ASTM D1894 | |
Static | 0.2-0.4 | ASTM D1894 | |
Shore hardness | 73-80 | ASTM D2240 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Charpy Notched Impact Strength | |||
23℃,4.00 mm | 100-200 | J/m | ASTM D6110 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Glass Transition Temperature | -40 | ℃ | ASTM D4065 |
Vicat Softening Temperature | 135-145 | ℃ | ASTM D1525 |
Melting temperature | 170-175 | ℃ | ASTM D3418 |
Peak Crystallization Temperature (DSC) | 134-144 | ℃ | ASTM D3418 |
Coeff. of linear thermal expansion | 1.4E-4 | cm/cm/℃ | ASTM D696 |
Specific Heat | |||
23℃ | 1200 | J/kg/℃ | ASTM E968 |
100℃ | 1600 | J/kg/℃ | ASTM E968 |
Thermal conductivity | 0.2 | W/m/K | ASTM C177 |
Crystallization Heat | 54-60 | J/g | ASTM D3417 |
Crystallization Point | 137-144 | ℃ | ASTM D3418 |
Heat of Fusion | 57-66 | J/g | ASTM D3417 |
ELECTRICAL | Nominal value | Unit | Test method |
---|---|---|---|
Surface Resistivity | >1E14 | ohms | ASTM D257 |
Volume Resistance | >1E14 | ohms·cm | ASTM D257 |
Dielectric Strength | 20-25 | kV/mm | ASTM D149 |
Dielectric Constant | 7-10 | ASTM D150 |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
Flame Class Rating | |||
0.1 mm | V-0 | UL 94 | |
Oxygen Index | |||
3 mm | 44 | % | ASTM D2863 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |