Somos® 9120 - SOLIAO

About
DSM’s Somos® 9120 is a liquid photopolymer that produces robust, functional and accurate parts using stereolithography machines. The material offers superior chemical resistance and a wide processing latitude. With mechanical properties that mimic many engineering plastics, parts created from Somos® 9120 exhibit superior fatigue properties, strong memory retention and high quality up-facing and down-facing surfaces. Somos® 9120 also offers a good balance of properties between rigidity and functionality. Applications This photopolymer is used in solid imaging processes, like stereolithography, to build three-dimensional parts. This material is also useful in creating parts for applications where durability and robustness are critical requirements (e.g., automobile components, electronic housings, medical products, large panels and snap-fit parts).&&

About

DSM’s Somos® 9120 is a liquid photopolymer that produces robust, functional and accurate parts using stereolithography machines. The material offers superior chemical resistance and a wide processing latitude. With mechanical properties that mimic many engineering plastics, parts created from Somos® 9120 exhibit superior fatigue properties, strong memory retention and high quality up-facing and down-facing surfaces. Somos® 9120 also offers a good balance of properties between rigidity and functionality. Applications This photopolymer is used in solid imaging processes, like stereolithography, to build three-dimensional parts. This material is also useful in creating parts for applications where durability and robustness are critical requirements (e.g., automobile components, electronic housings, medical products, large panels and snap-fit parts).&&

Product Description
Supplier	DSM
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good surface appearance,Fatigue resistance,Good wear resistance,Durability,Solvent resistance
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.13	g/cm³
viscosity
30℃	0.45	Pa·s

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	48 to 53	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	52 to 61	℃	ASTM D648

Supplementary information	Nominal value	Unit	Test method
Critical Exposure	10.9	mJ/cm²
Penetration depth	142.2	µm

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	80 to 82		ASTM D2240
Tensile modulus	1230 to 1460	MPa	ASTM D638
tensile strength	30.0 to 32.0	MPa	ASTM D638
Tensile strain
yield	15 to 25	%	ASTM D638
Bending modulus	1310 to 1460	MPa	ASTM D790
bending strength	44.0 to 46.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.