Somos® BioClear

About
DSM’s Somos® BioClear produces clear, strong, tough and water-resistant parts. This product is the first in the Somos® BioLine portfolio for medical applications and is ISO 10993-5, ISO 10993-10 and USP VI certified. Applications Somos® BioClear is designed for medical applications that are non-implant and have limited contact with the body, such as dental drill guides and device prototyping.&&

About

DSM’s Somos® BioClear produces clear, strong, tough and water-resistant parts. This product is the first in the Somos® BioLine portfolio for medical applications and is ISO 10993-5, ISO 10993-10 and USP VI certified. Applications Somos® BioClear is designed for medical applications that are non-implant and have limited contact with the body, such as dental drill guides and device prototyping.&&

Product Description
Supplier	DSM
Generic	3D打印材料
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Good flexibility,Low or no water absorption,Biocompatible
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.12	g/cm³
Water absorption rate
balance	0.35	%	ASTM D570
viscosity
30℃	0.26	Pa·s

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2650 to 2880	MPa	ASTM D638
tensile strength
fracture	47.1 to 53.6	MPa	ASTM D638
Tensile strain			ASTM D638
yield	3.0	%	ASTM D638
fracture	11 to 20	%	ASTM D638
Bending modulus	2040 to 2370	MPa	ASTM D790
bending strength	63.1 to 74.2	MPa	ASTM D790

film	Nominal value	Unit	Test method
Graves Tear	150.3	kN/m	ASTM D1004

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	21 to 32	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	45.9 to 54.5	℃	ASTM D648
1.8 MPa, unannealed	49.0 to 49.7	℃	ASTM D648
Glass transition temperature	39.0 to 46.0	℃	ASTM E1545
Linear coefficient of thermal expansion
MD			ASTM E831
-40 to 0 ℃	6.6E-5 to 6.7E-5	cm/cm/℃	ASTM E831
0 to 50 ℃	9.0E-5 to 9.6E-5	cm/cm/℃	ASTM E831
50 to 100 ℃	1.7E-4 to 1.9E-4	cm/cm/℃	ASTM E831
100 to 150 ℃	1.9E-4	cm/cm/℃	ASTM E831

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	15 to 16	kV/mm	ASTM D149
Dielectric constant			ASTM D150
60 Hz	3.90 to 4.10		ASTM D150
1 kHz	3.70 to 3.90		ASTM D150
1 MHz	3.40 to 3.50		ASTM D150

optical performance	Nominal value	Unit	Test method
Refractive index	1.512 to 1.515		ASTM D542

Supplementary information	Nominal value	Unit	Test method
Critical Exposure	11.5	mJ/cm²
Penetration depth	165.1	µm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.