Somos® GP Plus 14122

About
DSM’s Somos® GP Plus 14122 is a low-viscosity liquid photopolymer that produces water-resistant, durable and accurate three-dimensional parts. Somos® GP Plus 14122 has a white, opaque appearance with performance that mirrors production plastics like ABS and PBT. Applications Somos® GP Plus 14122 is ideal for many applications in the automotive, aerospace and consumer product industries. Somos® GP Plus 14122 is successful in creating functional prototypes, humidity / water-resistant concept models, and durable low volume production parts.&&

About

DSM’s Somos® GP Plus 14122 is a low-viscosity liquid photopolymer that produces water-resistant, durable and accurate three-dimensional parts. Somos® GP Plus 14122 has a white, opaque appearance with performance that mirrors production plastics like ABS and PBT. Applications Somos® GP Plus 14122 is ideal for many applications in the automotive, aerospace and consumer product industries. Somos® GP Plus 14122 is successful in creating functional prototypes, humidity / water-resistant concept models, and durable low volume production parts.&&

Product Description
Supplier	DSM
Generic	3D打印材料
Material Status	Commercial: Active
Features	Low or no water absorption,Low Viscosity,Moisture resistance,Durability
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.16	g/cm³
Water absorption rate
balance	0.40	%	ASTM D570
viscosity
30℃	0.34	Pa·s

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	23 to 29	J/m	ASTM D256-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	46.0	℃	ASTM D648
1.8 MPa, unannealed	41.0	℃	ASTM D648
Glass transition temperature	41.0 to 43.0	℃	ASTM E1545
Linear coefficient of thermal expansion
MD			ASTM E831
-40 to 0 ℃	6.3E-5	cm/cm/℃	ASTM E831
0 to 50 ℃	8.9E-5	cm/cm/℃	ASTM E831
50 to 100 ℃	1.7E-4	cm/cm/℃	ASTM E831
100 to 150 ℃	1.7E-4	cm/cm/℃	ASTM E831

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	18	kV/mm	ASTM D149
Dielectric constant			ASTM D150
60 Hz	3.80		ASTM D150
1 kHz	3.70		ASTM D150
1 MHz	3.40		ASTM D150

Supplementary information	Nominal value	Unit	Test method
Critical Exposure	13.0	mJ/cm²
Penetration depth	158.8	µm
Puncture energy
High Speed PunctureImpact	4.60	J	ASTM D3763

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	79		ASTM D2240
Tensile modulus	2370 to 2650	MPa	ASTM D638
tensile strength			ASTM D638
yield	47.2 to 47.6	MPa	ASTM D638
fracture	33.8 to 40.2	MPa	ASTM D638
Tensile strain			ASTM D638
yield	3.0	%	ASTM D638
fracture	6.0 to 9.0	%	ASTM D638
Bending modulus	2180 to 2220	MPa	ASTM D790
bending strength	66.8 to 67.8	MPa	ASTM D790
Poisson’s ratio	0.41		ASTM D638

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.