| About |
|---|
| Somos® NeXt is an extremely durable stereolithography (SL) resin that produces very accurate parts with high feature detail. Based on the Somos® DMX technology, Somos® NeXt is a next generation of material that facilitates the production of tough, complex parts with improved moisture resistance and greater thermal properties. Applications Somos® NeXt produces parts that are much more resistant to breakage than parts made with standard SL resins. It is ideal for use in functional testing applications as well as low-volume manufacturing applications where toughness is required. Market segments include aerospace, automotive, medical, consumer products and electronics. This resin is ideal for functional end-use performance prototypes such as: snap- fit designs, impellers, duct work, connectors and electronic covers, automotive housings and dashboard assemblies, packaging and sporting goods.&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | 3D打印材料 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Moisture resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 | g/cm³ | |
| Water absorption rate | |||
| balance | 0.39 to 0.41 | % | ASTM D570 |
| viscosity | |||
| 30℃ | 1.00 | Pa·s | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 47 to 52 | J/m | ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed | 55.0 to 57.0 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 48.0 to 51.0 | ℃ | ASTM D648 |
| Glass transition temperature | 43.0 to 47.0 | ℃ | ASTM E1545 |
| Linear coefficient of thermal expansion | |||
| MD | ASTM E831 | ||
| -40 to 0 ℃ | 7.2E-4 to 7.4E-4 | cm/cm/℃ | ASTM E831 |
| 0 to 50 ℃ | 1.1E-3 | cm/cm/℃ | ASTM E831 |
| 50 to 100 ℃ | 1.7E-3 to 1.8E-3 | cm/cm/℃ | ASTM E831 |
| 100 to 150 ℃ | 1.7E-3 to 1.8E-3 | cm/cm/℃ | ASTM E831 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 15 to 16 | kV/mm | ASTM D149 |
| Dielectric constant | ASTM D150 | ||
| 60 Hz | 4.65 | ASTM D150 | |
| 1 kHz | 3.97 | ASTM D150 | |
| 1 MHz | 3.62 | ASTM D150 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Critical Exposure | 12.0 | mJ/cm² | |
| Penetration depth | 147.3 | µm |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 82 | ASTM D2240 | |
| Tensile modulus | 2370 to 2490 | MPa | ASTM D638 |
| tensile strength | ASTM D638 | ||
| yield | 41.1 to 43.3 | MPa | ASTM D638 |
| fracture | 31.0 to 34.6 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 3.0 | % | ASTM D638 |
| fracture | 8.0 to 10 | % | ASTM D638 |
| Bending modulus | 2420 to 2530 | MPa | ASTM D790 |
| bending strength | 67.8 to 70.8 | MPa | ASTM D790 |
| Poisson’s ratio | 0.42 to 0.44 | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |